久久偷看各类WC女厕嘘嘘偷窃,热热色原原网站,无遮挡又爽又刺激的视频,久久综合狠狠综合久久综合88

1、 Installation equipment

山東釀酒設備廠家：先將熱處理爐、料桶和閉式冷卻塔放置好，接著將管路、過氣閥門接好，再用生石灰粉標出熱處理爐、料桶和閉式冷卻塔的部位后將他們游戲多開，安裝時先裝熱處理爐、再依據熱處理爐部位微調料桶的放置，接著安裝制冷設備。

Shandong brewing equipment manufacturer: first place the heat treatment furnace, material barrel and closed cooling tower, then connect the pipeline and gas passing valve, and then mark the parts of the heat treatment furnace, material barrel and closed cooling tower with quicklime powder, and then open them more. During installation, install the heat treatment furnace first, fine tune the placement of material barrel according to the parts of the heat treatment furnace, and then install the refrigeration equipment.

二、設備清洗

2、 Equipment cleaning

山東釀酒設備廠家：小型釀酒設備的清理工作中是十分關鍵的，假如無法恰當?shù)倪M(jìn)行便會造成釀制的酒異味重，環境衛生不合格等狀況。在安裝前需要用涼水對設備進行各個方面的工作中，確保釀酒過程的基本上性能。設備投入工作中前，要用蒸汽進行，具體方法是：將熱處理爐、料桶和閉式冷卻塔連接好，打火，造成蒸汽后三十分鐘后關閉電源總開關，進行工作中交付使用。

Shandong brewing equipment manufacturer: the cleaning of small brewing equipment is very key. If it cannot be carried out properly, it will cause heavy peculiar smell of brewed wine and unqualified environmental sanitation. Before installation, the equipment needs to be removed in all aspects with cold water to ensure the basic safety performance of the brewing process. Before the equipment is put into operation, it shall be removed with steam. The specific method is to connect the heat treatment furnace, material barrel and closed cooling tower, ignite, turn off the main power switch 30 minutes after the steam is caused, and deliver it for use in operation.

三、設備維護管理與維護保養

3、 Equipment maintenance management and maintenance

1.小型釀酒設在產酒時應該應用軟化水處理進行那樣可以降低水中的污漬對設備造成危害。

1. Softened water shall be used for small-scale brewing during wine production, so as to reduce the damage of stains in the water to the equipment.

2.每次工作中進行后，應打開放進水閥排空熱處理爐內部的儲水，降低污漬沉積的狀況。

2. After each work, open the water drain valve to drain the water stored in the heat treatment furnace to reduce the deposition of stains.

我們一直在堅持分享的路上全自動涼茬機http://xh191.cn真正為您您所需要的問題.

We have been insisting on sharing the full-automatic stubble cooler on the road http://xh191.cn Truly solve the problems you need